Sony RDR-VX500 Operating Instructions (RDRVX500) Operating Instructions Manual page 19

Connecting to audio/video input
A
jacks
If your TV, monitor, projector, or other equipment
has audio/video (A/V) input jacks, you will get
better picture and sound if you connect the
recorder using this connection.
Yellow
White (L)
Red (R)
Connecting to an antenna input
B
jack
If your TV does not have audio/video (A/V) input
jack, connect the recorder to a TV using an
antenna cable.
Setting the RF Output channel
When connecting the recorder to the TV using
only the antenna cable, you must set the RF
Output channel in the "Tuner Preset" so that the
TV can receive the correct signal from the
recorder.
1
Press "/1 to turn on the recorder.
2
Press repeatedly until "
TV/VIDEO
disappears from the front panel display.
3
Turn on your TV and set it to the channel
When using channel 4 to receive the recorder
signal, see "3, 4 Ch Out" on page 98.
Yellow
White (L)
Red (R)
"/1
TV/VIDEO
"
TV
3.
,continued 19