Sony RDR-VX500 Operating Instructions (RDRVX500) Operating Instructions Manual page 61

Buttons
REPEAT
To resume normal playback, press H PLAY.
To playback quickly with sound (Scan Audio)
(DVD with Dolby Digital sound tracks only)
Set "Scan Audio" of "Audio" to "On" in the
"Setup" display (page 103).
You can then play quickly with dialog or sound
during FF1 fast-forward of a DVD disc with
Dolby Digital sound tracks.
z Hint
You can select the audio/subtitle settings and the angle
using the TV screen. Press TOOLS during playback,
select "Audio," "Subtitle," or "Angle" using M/m, then
select the setting or angle using </,. Then press
ENTER.
Notes
• Shuffle play will stop when all the tracks are played
back.
• You cannot repeat play in the following cases:
– while in shuffle play
– VIDEO CDs with PBC function on.
• When the playback signal does not contain a signal for
the surround speakers, the surround effects will be
difficult to hear.
• When you select one of the surround modes, turn off
the surround settings of the connected TV or amplifier
(receiver).
• Make sure that your listening position is between and
at an equal distance from your speakers, and that the
speakers are located in similar surroundings.
Operations
Selects the item to be repeated using M/m.
When playing a DVD
• Chapter: repeats the current chapter.
• Title: repeats the current title on a disc.
• A-B (Repeat A-B Play): repeats a specific portion
(page 58).
When playing a VIDEO CD (with PBC function off)
• Track: repeats the current track.
• Disc: repeats all of the tracks.
• A-B (Repeat A-B Play): repeats a specific portion
(page 58).
When playing a CD
• Track: repeats the current track.
• Disc: repeats all of the tracks.
When playing a DATA CD (MP3 audio)
• File: repeats the current track.
• Folder: repeats the current album.
To cancel Repeat Play, press REPEAT, and select
"Off."
Notes on playing DTS sound tracks on a CD
When playing DTS-encoded CDs, excessive noise will
be heard from the analog stereo jacks. To avoid possible
damage to the audio system, the consumer should take
proper precautions when the analog stereo jacks of the
recorder are connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an external 5.1-
channel decoder system must be connected to the digital
jack of the recorder.
Notes on playing DVDs with a DTS sound track
DTS audio signals are output only through the DIGITAL
AUDIO OUT (COAXIAL or OPTICAL) jack.
When you play a DVD with DTS sound tracks, set
"Digital Out" – "DTS" to "On" of "Audio" in the "Setup"
display (page 102).
Discs
+ RW - RW - RW
VR
Video
-
+ R R DVD
*
VCD
CD
DATA CD
* with PBC function off
61