Preparations For Playback; Switching System Frequency; Setting The Audio Monitor Output; Selecting A Conversion Mode - Sony HDCAM J-H1 Operation Manual

4-1 Preparations for Playback

4-1-1 Switching System
Frequency
Switch a setting of this unit to correspond with the
system frequency of a using cassette. (This is set to
29.97 system at the factory.)
For details, see "Switching system frequency (menu item
013)" on page 5-4.
4-1-2 Setting the Audio Monitor
Output
Press AU MON SEL button to assign the channels to
L/R outputs.
For details of channel setting and operation, see "AU MON
SEL button" on page 2-3.
4-1-3 Selecting a Conversion
Mode for the Down-Converter
Select a conversion mode from CONVERTER MODE
(DC), extended menu item 930.
Playback
• EDGE-CROP mode (CROP)
To adjust the horizontal position of the edge-
cropped screen
Use H CROP POSITION (DC), extended menu item
932.
• LETTER BOX mode (LETTER BOX)
When LETTER BOX is selected, you can choose an
aspect ratio for the down-converted screen from
among the following 3 conversion modes included in
LETTER BOX MODE (DC), extended menu item
931.
When "16:9" is selected
Chapter
HD
Crops a quarter of both ends of an HDVS screen.
HD
Converts the screen with keeping an aspect ratio of 16:9.
4
SD
SD
4-1
Chapter 4 Playback