Table of Contents
Advertisement
Disc Operations
SA-CD (Super Audio CD)
The SA-CD standard is based on Direct
Stream Digital (DSD) technology. This
new direct-stream digital format
comprises a 1-bit system that has a digital
sampling frequency that is 64 times higher
than that of conventional audio CD.
There are three types of SA-CD discs:
single-layer, dual-layer and hybrid discs.
Each type may contain two areas of
recorded information: a High Quality
Stereo area and a High Quality Multi-
channel area.
– A single layer disc can contain both
information areas.
– A dual layer disc can contain both
information areas. Double the
information can be stored on the disc,
thanks to the second layer.
– A hybrid disc can contain both
information areas, and also a second,
standard CD layer, making it playable on
standard CD players.
SA-CD Disc Types
Dual layer disc
Single layer disc
HD layer
Hybrid SA-CD-Disc
1
2
3
TIPS:
The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
18
Hybrid layer
disc
CD layer
HD layer
HD layer
CD layer that plays on any CD
player
High Density layer containing:
- High Quality DSD Stereo
- High Quality DSD Multi-
channel
Playing a disc
1 Load a disc.
Playback starts automatically.
➜ The TV screen will display the current
playing status and current playing track
list in the area.
2 Playback will stop at the end of the disc.
3 To stop playback, press STOP 9.
Changing SA-CD playback area
and layer
You can change the SA-CD playback area
by pressing the SOUND MODE button,
and change the playback layer by pressing
the AUDIO button.
• On hybrid discs (with SA-CD and CD
layers), the player will always start
playing the SA-CD layer (multi channel
area).
• You can change between SA-CD multi
channel and SA-CD stereo area by
pressing SOUND MODE (depending
on availability of the mode on the disc).
1 Press 1 and select the folder using
34, then Press ENTER/OK.
2 Press 34 to select a track.
3 Press ENTER/OK to confirm.
• To switch between the SA-CD layer
and the CD layer, press the AUDIO
button while playback is stopped.
• The SA-CD indicator lights only when
the SA-CD layer is selected.
Notes:
– SA-CD Text is not supported.
– You can not change the Analog output
setting during SA-CD playback (see
page 24 "Audio Setup Menu").
or
Advertisement
Table of Contents
