Step 6: Easy Setup - Sony VIDEO Plus RDR-HX720 Operating Instructions Manual

Step 6: Easy Setup

Make the basic adjustments by following the
on-screen instructions in "Easy Setup."
O RETURN
1
Turn on the recorder and your TV.
Then switch the input selector on your
TV so that the signal from the recorder
appears on your TV screen.
The initial settings message appears.
• If this message does not appear, select
"Easy Setup" from "SETUP" in the
System Menu ("Settings and
Adjustments" on page 82).
2
Press ENTER.
Follow the on-screen instructions to
make the following settings.
Easy Setup - OSD
Select a language for the on-screen
displays.
Easy Setup - Tuner System
Select your country/region or language.
The programme position order will be set
according to the country/region you set.
To set the programme positions
manually, see page 82.
• If you live in a French speaking country
that is not listed on the display, select
"ELSE - English."
20
The recorder will automatically search
for a clock signal. If a clock signal cannot
be found, set the clock manually using
</M/m/,, and press ENTER.
If you have a wide-screen TV, select
[/1
"16:9." If you have a standard TV, select
either "4:3 Letter Box" (shrink to fit) or
"4:3 Pan Scan" (stretch to fit). This will
determine how "wide-screen" images are
displayed on your TV.
If you are using the COMPONENT
VIDEO OUT jack, select "On."
</M/m/,,
ENTER
If you plan to connect a decoder such as
a PAY-TV/Canal Plus analogue decoder
to the LINE 3/DECODER jack, select
"Yes."
To output video signals, select "Video."
TV [/1
To output S video signals, select "S
Video."
To output RGB signals, select "RGB."
Select "Video" to enjoy the
SMARTLINK features.
• If you set "Easy Setup - Component
• If you set "Easy Setup - Line3 Input" to
If you connected an AV amplifier
(receiver) using a coaxial cord, select
"Yes : DIGITAL OUT" and set the
digital output signal (page 90).
3
Press ENTER when "Finish" appears.
"Easy Setup" is finished.
To return to the previous step
Press O RETURN.
z Hints
• If your AV amplifier (receiver) has an MPEG
audio decoder, set "MPEG" to "MPEG"
(page 90).
• If you want to run "Easy Setup" again, select
"Easy Setup" from "SETUP" in the System Menu
(page 96).
Easy Setup - Clock
Easy Setup - TV Type (page 87)
Easy Setup - Component Out
Easy Setup - Line3 Input
Easy Setup - Line1 Output
Out" to "On," you cannot select
"RGB."
"Yes," you cannot select "S Video."
Easy Setup - Audio Connection