Positioning; Environmental Influences - Siemens FDCL221 Technical Manual

4.3

Positioning

4.4

Environmental influences

Building Technologies
Fire Safety & Security Products
When renewing collective systems, the line separators are installed at points where
several stub lines converge.
The line separator can usually be housed in an intermediate distributor on different
floors.
If all the stub lines are routed individually to the collective control panel, the line
separator is directly installed in the new fire control panel.
If the devices are used in industrial applications, consultation with the project
manager is required, since plastics do not withstand certain environmental
conditions.
The following factors must be taken into consideration:
Chemicals
Temperature
Moisture
The housing is made from plastic and the printed circuit board is sealed with wax
for increased corrosion protection.
See also
Technical data [ 27]
Planning
19
007063_e_en_--
09.06.2009