Sony RDR-VX515 Operating Instructions Manual page 75

When the counter reaches "0:00," the recorder
stops recording and turns off.
To cancel the Quick Timer
Press z REC repeatedly until the counter appears
in the front panel display. The recorder returns to
normal recording mode.
To stop recording
x
Press STOP twice.
Checking the remaining tape length
You can check recording information, such as
remaining tape length or recording mode, etc.
Press DISPLAY while recording.
The information display appears.
Press the button repeatedly to change the display
(page 71).
A Recording status
B Time counter
C Recording mode
D Remaining tape length
E Current channel
To check the remaining tape length, set "VCR
Function" – "Tape Length" of "Features" in the
"Setup" display correctly (page 100).
z Hint
You can view the information also in the front panel
display. Press TIME/TEXT repeatedly to change the
display. Note that TIME/TEXT does not work during
One-touch Timer Recording.
• The remaining tape length may not be indicated
• After DISPLAY is pressed, it may take one minute for
Record
0:30:00
SP
Rem 01:30
CH 110
Notes
accurately for short tapes such as T-20 or T-30, or tapes
recorded in LP mode.
the remaining tape length to appear.
75