Watching Tv - Sony RDR-GXD455 Operating Instructions Manual

Watching TV

By connecting your TV to this recorder, you can
watch digital and analog channels on your TV.
Number
buttons,
SET,
· (dot)
1
Turn on this recorder.
2
Turn on the TV and switch the TV's input
selector so that the signal from the
recorder appears on your TV screen.
3
Press DIGITAL/ANALOG to select the
broadcast, digital or analog.
4
Press the number buttons to select the
channel you want to watch, and press SET.
For example, to select digital channel number
D11.1
t t
1 1 1 1
The front panel display should show the
following:
34
"/1
1 1 2 2 3 3
CH +/–
4 4 5 5 6 6
7 7 8 8 9 9
DIGITAL/
0 0
ANALOG
t t
SET
1 1
The TV screen should show the following:
No Disc
For example, to select analog channel number
Ch23
SET
t t
2 2 3 3
The front panel display should show the
following:
The TV screen should show the following:
No Disc
z Hint
You can also select a channel using the CH +/– button.
Notes
• If you do not press the SET button after setting the
number buttons, the channel is not changed.
• When you change an analog channel to a digital
channel, press the DIGITAL/ANALOG button. Even if
you press the ·(dot) button, an analog channel is not
changed to digital.
• If you receive new digital channels, or the black screen
appears on your TV, set "Auto Preset" of "Tuner
Preset" again (page 76).
• Some digital channels do not have a "·" (dot). Refer to
the TV program.
• Confirm the digital broadcast content of the channel
number received before timer recording. If the recorder
receives a digital broadcast without channel number
information, the recorder assigns the channel number
automatically.
SP D11.1
SP Ch23