Equipment Parameter Module; Iepar_Bool; Iepar_Bool: Equipment Parameter Module For The Boolean Data Type - Siemens SIMATIC PCS 7 Function Manual

Equipment Parameter Module

3.1

IEPAR_BOOL

3.1.1

IEPAR_BOOL: Equipment Parameter Module for the Boolean Data Type

IEPAR_BOOL: Equipment Parameter Module for the Boolean Data Type
Object name (type + number)
FB 256 (Page 44)
Calling OBs
The OB in which you install the block (for example, OB1).
Function
The block is used to set the setpoints and to acquire the process values of the BOOL data
type (bit variable).
How the block functions
The bit signal applied to the inputs SP_VAL or ACT_VAL is transferred to the outputs
Q_SP_VAL or QACT_VAL respectively. SP_VAL is set typically by the batch control or the
IEPH faceplate, ACT_VAL by the user program.
SIMATIC BATCH Interface Blocks V7.1
Function Manual, 03/2009, A5E02171101-01
3
43