Audio Settings (Audio) - Sony RDR-GX700 Operating Instructions Manual

Line1 Output
Selects a method of outputting video signals for
the LINE 1-TV jack.
RGB Outputs RGB signals.
Video Outputs video signals.
S Video
Outputs S-video signals.
Notes
• If your TV does not accept S-video or RGB signals, no
picture appears on the TV screen even if you select "S
Video" or "RGB." See the instructions supplied with
your TV.
• You cannot select "RGB" when "Component Out"
above is set to "On."
• SMARTLINK is available only when "Video" is
selected.
Line3 Input
Selects a method of inputting video signals for the
LINE 3/DECODER jack. The pictures will not be
clear if this setting does not match the type of
video input signal.
Video/RGB Inputs video signals or RGB
signals.
Decoder Select this when connecting to a
PAY-TV/Canal Plus decoder.
S Video Inputs S-video signals.
Line3 Output
Selects a method of outputting video signals for
the LINE 3/DECODER jack.
Video
Outputs video signals.
S Video Outputs S-video signals.
Line4 Input
Selects a method of inputting video signals for the
LINE 4 IN jack on the rear panel of the recorder.
Video Inputs video signals.
S Video Inputs S-video signals.

Audio Settings (Audio)

The Audio Setup allows you to adjust the sound
according to the playback and connection
conditions.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Audio," and press ENTER.
The Audio Setup appears with the following
options. The default settings are underlined.
SETUP
Settings Audio ATT :
Video Audio DRC :
Audio Downmix :
Features Digital Out :
Options Dolby Digital :
MPEG :
Easy Setup DTS :
Audio ATT (attenuation)
If the playback sound is distorted, set this item to
"On." The recorder reduces the audio output level.
This function affects the output of the following
jacks:
– LINE 2 OUT AUDIO L/R jacks
– LINE 1-TV jack
– LINE 3/DECODER jack
On
Select this when the
playback sound from the
speakers is distorted.
Off
Normally select this
position.
Off
Standard
Dolby Surround
On
D-PCM
PCM
Off
,continued 89