Using The Progressive Button - Sony RDR-GX700 Operating Instructions Manual

• TV Direct Rec
You can easily record what you are watching on
your TV (page 47).
• One Touch Play
You can turn on the recorder and TV, set the
TV's input to the recorder, and start playback
with one touch of the H (play) button
(page 53).
• One Touch Menu
You can turn on the recorder and TV, set the TV
to the recorder's channel, and display the Title
List menu with one touch of the TITLE LIST
button (page 53).
• One Touch Timer
You can turn on the recorder and TV, set the TV
to the recorder's channel, and display the timer
programming menu with one touch of the
TIMER button on the remote (page 44).
• Automatic Power Off
The recorder will turn off automatically if the
recorder is not used after you turn off the TV.
• NexTView Download
You can easily set the timer by using the
NexTView Download function on your TV.
See your TV's instruction manual.
*1
"MEGALOGIC" is a registered trademark of Grundig
Corporation.
*2
"EASYLINK" and "CINEMALINK" are trademarks
of Philips Corporation.
*3
"Q-Link" is a trademark of Panasonic Corporation.
*4
"EURO VIEW LINK" is a trademark of Toshiba
Corporation.
*5
"T-V LINK" is a trademark of JVC Corporation.
z Hint
SMARTLINK also works with TVs or other equipment
having EPG Timer Control, EPG Title Download, and
Now Recording functions. For details, refer to the
operating instructions supplied with your TV or other
equipment.
Notes
• The SMARTLINK features are available only when
"Video" is selected in "Line1 Output."
• The SMARTLINK features are not available for
devices connected via the DVD recorder's LINE 3/
DECODER jack.
• Not all TVs respond to the functions above.
16

Using the PROGRESSIVE button

By using the PROGRESSIVE button on the
remote, you can select the signal format in which
the recorder outputs video signals: interlace or
progressive.
Connect the recorder using the COMPONENT
VIDEO OUT jacks (pattern D on page 15), and
set "Component Out" in Video Setup to "On"
(page 88). Then press the PROGRESSIVE button.
"PROGRESSIVE" appears in the front panel
display when the recorder outputs progressive
signals.
Progressive
Select this when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT
VIDEO OUT jacks.
Note that the pictures will not be clear or no
picture will appear if you select progressive signal
output when either of the above conditions is not
met.
Interlace
Set to this position when:
– your TV does not accept progressive signals, or,
– your TV is connected to jacks other than the
COMPONENT VIDEO OUT jacks (LINE OUT
(VIDEO) or S VIDEO).
z Hint
When you select progressive signal output, you can fine-
tune the signal according to the type of software you are
watching (page 88).
Note
Consumers should note that not all high definition
television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In the
case of 525/625 progressive scan picture problems, it is
recommended that the user switch the connection to the
'standard definition' output. If there are questions
regarding our TV set compatibility with this model 525p/
625p DVD recorder, please contact our customer service
centre.