Sony RDR-GX700 Operating Instructions Manual page 46

Sony dvd recorder operating instructions rdr-gx300, rdr-gx700
Hide thumbs Also See for RDR-GX700:
Table of Contents

Advertisement

4
Select one of the options, and press
ENTER.
"Modify": Changes the timer setting. Select
an item using </, and adjust using M/m.
Select "OK" and press ENTER.
Modify
Modify the timer setting.
Date
Start
Mon-Sat 22
:
"Erase": Erases the timer setting. Select "OK"
and press ENTER.
Erase
Are you sure you want to erase this timer setting?
Mon-Sat 22:00-22:15
"Check Overlap": Checks for overlapped
settings.
Check Overlap
These timer settings overlap.
Fri
29.10
Fri
29.10
Select "Close" to return to the Timer List.
To change or cancel the setting, repeat steps 3
and 4 above.
When the timer settings overlap
The programme that starts first has priority and the
second programme starts recording only after the
first programme has finished.
7:00
A
will be cut off
46
PDC
Stop
Prog.
Mode
VPS
Cancel
00
22
:
15
AAB
SP
Off
AAB
SP
OK
Cancel
21:00-22:00
AAB
SP
PDC/VPS
21:30-22:30
DEF
LP
PDC/VPS
Close
8:00
9:00
10:00
B
When the recordings start at the same time
The programme that is set last has priority. In this
example, timer setting B is set after A, so the first
part of timer setting A will not be recorded.
7:00
OK
When the end time of one recording and the
start time of another are the same
After finishing the previous recording, the other
recording may be delayed.
7:00
To turn off the Timer List
Press O RETURN.
z Hint
While recording, you cannot modify the timer setting for
the current recording, but you can extend the recording
duration of the recording time (page 44).
Notes
• When "PDC/VPS" is set to "On" for one or more timer
recordings, the start times may change in the event of a
broadcast delay or early start.
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has priority.
• Even if the timer is set for the same daily or weekly
programme, the timer recording cannot be made if it
overlaps with a programme that has priority. "
appear next to the overlapped setting in the Timer List.
Check the priority order of the settings.
8:00
9:00
10:00
A
B
8:00
9:00
10:00
A
B
" will

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rdr-gx300

Table of Contents