Sony RDR-GX700 Operating Instructions Manual page 80

SYSTEM
MENU
1
Follow steps 1 to 4 of "Preparing for
recording using the DV IN jack" (page 70),
then press SYSTEM MENU.
Be sure to use the original DV format tape and
the DVD-RW (VR mode) that corresponds to
the program in the DV Edit List.
2
Select "DV EDIT," and press ENTER.
The DV Edit menu appears.
3
Select "DV Edit List," and press ENTER.
The DV Edit List menu appears.
A disc mark will appear next to the program
that corresponds to the inserted disc. You can
only edit the programs that display a disc
mark.
Disc mark
DV EDIT LIST
Spring vacation 2004
My Birthday
DV 24.12.2003 11:34 - 25.12.2003 13:18
4
Select the program you want to edit, and
press ENTER.
The sub-menu appears.
"DV Dubbing": Starts Copy Dubbing the
program. Follow the instructions on page 78.
"Erase": Erases the programme from the DV
Edit List.
"Edit": Allows you to edit the program
contents (see below).
"Preview"*: Allows you to check the program
contents (see below).
80
1 2 3
4 5 6
7 8 9
0
</M/m/,,
ENTER
1H12M 5.6
1H16M 10.6
1H24M 18.6
"Make a Playlist"*: Creates a Playlist title of
the same contents. When asked, select "OK"
to enter the default name, or select "Enter" to
enter a new name (page 40).
"Rename": Allows you to re-enter the
program name.
* These sub-menu items do not appear when the
program contains no scenes.
5
Select "Edit," and press ENTER.
The Scene List menu appears with all of the
scenes the program contains. To add new
scenes, select "Add" and press ENTER. When
the display for selecting the IN point (start of
the scene) appears, follow steps 5 to 8 of
"Program Edit" (page 74).
Total duration of
the program
SCENE LIST
0:00:30-0:00:52
1
Duration 0:00:22
0:01:40-0:06:23
2
Duration 0:06:43
0:07:07-0:10:51
3
Duration 0:03:44
0:11:40-0:16:19
4
Duration 0:04:39
• If the program contains no scenes, the
display asks whether to generate scenes
within the program automatically or
manually. Follow steps 5 to 6 of "Advanced
Program Edit" (page 76).
6
Select the scene you want to edit, and
press ENTER.
The sub-menu appears. Select an option and
edit the scene.
"Move": Changes the scene order. Follow the
explanations on the screen to change the
order.
"Erase": Erases the scene. When asked for
confirmation, select "OK."
"Preview": Plays the selected scene.
"Change IN": Changes the start of the scene.
See step 6 of "Program Edit" for details
(page 74).
"Change OUT": Changes the end of the scene.
See step 7 of "Program Edit" for details
(page 74).
Total number
of scenes
Total 1:23:30 Scenes 20
OK
Quit
Add