Download Print this page

Sony MZ-NH900 Setup Manual

Himd recorders
Hide thumbs Also See for MZ-NH900:

Advertisement

Quick Links

Recording with the Sony MZ-NH-900
Set-Up Steps for MD Mode Only
The HiMD recorders can record in two formats: the higher quality HiMD
format or the Standard MD SP format. They can also record on both the
old, "MD" discs and the new HiMD discs. The separate set-up steps for
the Hi-MD mode follow these below.
These steps are for MD Disc mode, NOT Hi-MD !!
Files created in the MD format cannot be transferred digitally via
SoundStage and a USB cable on a PC. MD format recordings have to be
transferred in real time on the Transfer platform in B-18 or via a analog
cable. Format Your Discs should be formatted in HiMD mode unless you
have a special reason to use MD mode.
Recording Kit: Sony MZ-NH900 recorder; 110 A.C. power Supply;
Charging cradle; USB cable; AA battery holder (detachable); Sony MDR-
V600 Headphones or similar. 1- Rode NT4 stereo mic or 1- stereo pair
of Sound Professional Binaural mics.
With a Sound Devices Preamp Some Sony MZ-NH900 recorders will
become available alone and some will be in backpack kits using the
MP-2 or Mix Pre mic preamps and condenser mics-- probably the Rode
NT1A's and the CAD 179's. The later kits can only be checked-out to
students who have taken Field Audio 420 or are enrolled in 460 and
receive a demo.
Set-Up Steps for the Sony MZ-NH900 MD Recorder
It is very important to go through theses steps every time before you
start recording and, preferably, before you even set off to record. Take
some time to practice placing the recorder into manual record gain
mode because you'll need to be able to do this quickly and confidently
in the field. If you fail to do some of the below steps, your recording
can suffer in terms of quality and in some cases, it won't be able to be
imported into a computer without a lot of extra work or maybe, not at
all.
1

Advertisement

loading

Summary of Contents for Sony MZ-NH900

  • Page 1 MD mode. Recording Kit: Sony MZ-NH900 recorder; 110 A.C. power Supply; Charging cradle; USB cable; AA battery holder (detachable); Sony MDR- V600 Headphones or similar. 1- Rode NT4 stereo mic or 1- stereo pair of Sound Professional Binaural mics.
  • Page 3 Perform these steps with No Disc in the Recorder:...
  • Page 4 Set to Advanced Menu Mode for 2 seconds until the menu window activates. Rotate the circular jog wheel until the word, ENTER button (the button in the middle of the Jog wheel) to select “Option.” Rotate the jog wheel until the word "Advanced" is blinking and select it by pressing ENTER.
  • Page 5 Attach the XLR-> 1/8” stereo mini-plug cable to the end of the NT4 mic. Plug the mini-plug connector into the RED mic in jack on the Sony Recorder and the headphones into the black headphone jack. Headphone OUT Set/Check Mic Sensitivity Navi/Menu button for 2 seconds until the menu window activates.
  • Page 6 place it in pause and then use the menu to change to Manual Record level. Push the RED REC button down and slide the button to the right to put the recorder in instant record mode (auto gain). Press on the PAUSE BUTTON. Press and hold the Navi/Menu button for 2 seconds until the menu window activates.
  • Page 7 19. Playing Recordings. Insert the disc, press the left or right edge of the ENTER button to shuffle through your tracks. 20. Prevent accidental erasure of recorded discs by sliding the white tab on the rear edge of the disc until the slot is open. 21.
  • Page 8 MD disc unless the disk is reformatted into the HiMD format. There is a PC computer in B-56 or B-18 for making the digital transfers from the Sony NH-900 itself. You must use a Mac compatible HiMD recorder and disks recorded on this Mac compatible recorders (models MZ-M100 or MZ-M10) to be able to transfer HiMD recordings directly to a Mac.
  • Page 10 Perform these steps with No Disc in the Recorder: 4. Set to Advanced Menu Mode, for 2 seconds until the menu window activates. Rotate the circular jog wheel until the word, ENTER button (the button in the middle of the Jog wheel) to select “Option.”...
  • Page 11 EDIT, OPTION and RECORD SET 6. Depending on the type and state of your disk, follow one of these steps: a) If you are recording onto new or blank 1GB HiMD disk, go to step b) If you are recording on a 1GB HiMD disk that you wish to remove all previous tracks from before you begin, press and hold the Navi/Menu button for 2 seconds until the menu window activates.
  • Page 12 8. There are two suggested recording modes PCM and HiSP, PCM is the highest quality mode. A 1GB disk will hold 92 minutes at the PCM quality and 8 hours at the HiSP quality. An older, smaller MD disk will hold 38 minutes of PCM quality and 74 minutes of HiSP quality.
  • Page 13 13. Attach the XLR end of the XLR5-> 1/8” stereo mini-plug cable into the tail of the NT4 mic. mic in jack on the Sony Recorder and the headphones into the black headphone jack. Headphone OUT Set/Check Mic Sensitivity Navi/Menu button for 2 seconds until the menu window activates.
  • Page 14 You can change the record level as the deck while recording if necessary. 16. To start recording, press again on the Pause button. When you are ready to stop recording, press on the PAUSE button again. Try to not stop the recorder with the STOP button unless you are taking a break because this will take the deck out of Manual Record Level mode.
  • Page 15 MITB…" option. Leave the password window blank.. 3. Connect your Sony HiMD recorder to the AC power supply that’s with the platform or in your recorder kit. on battery power! Connect your Sony Hi-MD recorder to the PC using the USB cable that with the platform or in your Recorder Kit.
  • Page 16 folder if you want every file in that folder. When you are sure you have selected all of the one's you want, click the Red Transfer button (left facing arrow). The transfer process takes about 40-50 minutes for the transfer and wav conversion of a full 1GB disk. 10.
  • Page 17 Making PC and Mac Compatible Data Disks with Nero These steps assume you have already created .wav files on a PC that are ready to be saved to disk. If any of your sound files is larger than 700mb, use a DVD-R blank. DVD-R will hold a little over 4.3 GB. 1.
  • Page 18 i) At the prompt regarding burning option, select “Burn without multi-session.” j) While it is burning, click in the box for “verify written data.” Importing/Splitting the files into Logic On the Mac desktop, drag the folder named, "DragToYour HardDrive" to make a copy of it onto a partition of your FireWire Hard drive.