Sony MZ-NH900 Setup Manual page 11

Himd recorders

Hide thumbs Also See for MZ-NH900:

6. Depending on the type and state of your disk, follow one of these

steps:

a) If you are recording onto new or blank 1GB HiMD disk, go to step

8 .

b) If you are recording on a 1GB HiMD disk that you wish to remove

all previous tracks from before you begin, press and hold the

Navi/Menu button for 2 seconds until the menu window activates.

Rotate jog wheel to EDIT, select it by pressing the ENTER button

in the center of the Jog Wheel. Under Edit-> Erase-> All Erase-

>Yes. After the while it will indicate "No Tracks." Skip to step 8.

c) If you are recording onto a blank, older MD disk, press and hold

the Navi/Menu button for 2 seconds until the menu window

activates. Rotate jog wheel to EDIT, select it by pressing the

ENTER button in the center of the Jog Wheel. Under Edit->

Format-> Yes.

Set Disc Mode in HiMD format

for 2 seconds until the menu window activates. Rotate jog wheel to

Option, select it by pressing the ENTER button in the center of the

Jog Wheel. Under Option-> select Disc Mode-> and blinking "HiMD."

The "EOR" Steps

EDIT, OPTION and RECORD SET

After the while it will indicate "No Tracks."

Press and hold the Navi/Menu button