Assignment Of The Cyclic Process Image - Siemens Library SENTRON 3WL Function Manual

Description of blocks
3.3 Driver module DRV_3VL
Message block Message
number
5
6
7
8
Auxiliary values
EV_ID Auxiliary value
MSG_EVID1 1
- 2
MSG_EVID2
3
4
5
6
7
8
9
10
3.3.5

Assignment of the cyclic process image

Only basic type 1 is supported.
NOTICE
This allocation does not match the default allocation of basic type 1 for a VL device. Under
certain circumstances, the allocation in the device therefore has to be adjusted. The bytes
which deviate from the default allocation are shown in
The max. current in the phase with maximum load, which can be found at byte 8 / 9 by
default, is calculated inside the block.
Name
0 / 1 Control bytes
0 / 1 Binary status information
2 / 3 Current in phase 1
4 / 5 Current in phase 2
6 / 7 Current in phase 3
8 / 9 Current in neutral conductor
100
Message text
Perform visual inspection on main contacts
Immediate maintenance of main contacts
Monitoring error
Forbidden switching command for auto mode - switching command
ignored
Block parameters
AUX_PR01
AUX_PR02
AUX_PR03
AUX_PR04
AUX_PR05
AUX_PR06
AUX_PR07
AUX_PR08
AUX_PR09
AUX_PR10
Message class
WH
AH
AS Control System
Fault
AS Control System
Fault
italics
.
Inputs
2
2
2
2
2
Library SENTRON 3WL / 3VL for SIMATIC PCS 7
Function Manual, 11/2008, A5E02316914A-01
Outputs
2