Side Variability Of Unit Connections; Dispatch And Packaging; Delivery Contents; Information And Safety Labels - Remak CAKE Installation And Operating Instructions Manual

Side Arrangement and Dispatch
Side Arrangement of Air-handling unit
The connection side is always determined according to the inlet
air flow direction.
Figure 1 – Side arrangement
LEFT version displayed.

Information and Safety Labels

CAKE air handling units are labelled with the warning and infor-
mation stickers and manufacturer's logo on the external side of
the casing. Inside the unit, safety labels are fitted, and a summary
information label, including a description of components, is
fitted on the doors.
The "Other Danger" warning label situated on the face
side of the service door indicates the hazard of catching
by movable parts.
The switchboard box, block of the electric heater,
wiring boxes and service panels covering other elect-
rical equipment are labelled with the "ATTENTION!
ELECTRICAL EQUIPMENT" warning label. Spots
intended for the grounding connection are labelled
with a grounding symbol.
4
Connecting boxes, terminals in the integrated control
unit and the main switch terminals are marked with
warning labels: "Attention! The device is under
voltage even if the main switch is switched off!"

Dispatch and Packaging

Delivery Contents

The following items are enclosed to each delivery of the compact
air-handling unit:

Accompanying technical documentation
 Commercial and technical documentation, including
the compact air-handling unit assembly drawing
 Connecting material kit

Installation kit

Measuring & control components, respectively accessories
in accordance with the bill of delivery
 A key to access the integrated switchboard box
(if included in the delivery)
Packaging
As standard, the transport blocks of the CAKE compact air- han-
dling unit are packed in PE foil and provided with cardboard and
polystyrene protecting guards. If the compact air-handling unit is
delivered assembled, it is always equipped with the mounted base
frame. If the compact air-handling unit is delivered disassembled,
each block is dispatched separately. If the base frame includes
fixed support legs, the compact air-handling unit is dispatched
without handling means (i.e., on the support legs without the
pallet) as standard.
On the pallet, it is delivered a compact air-handling unit which:

includes a base frame without support legs

is delivered disassembled and the block does not include
a base frame;
 is delivered disassembled;
 includes a base frame with fixed support legs and delivery
on the base frame is required by the costumer's option
Figure 2 – Handling using handling equipment
Transport and Handling of Components
Loading and unloading can be performed by a fork-lift truck or a
crane. If a crane is used, the unit (or its parts) can be transported
on a pallet (the transported block must be securely attached to
the pallet using straps), or suitable handling devices can be used,
using the base frame openings to handle the unit.