Advertisement
2. S E T U P:
P U T S KOT T I TO G E T H E R I N 8 E A SY S T E P S .
• It also has a slim connection joint on the side which is marked with a
matching small triangle.
• Slide the short panel onto the longer one at the corresponding
triangle-adjacent slits.
Step 1:
• Take one long side panel with
the Skotti logo on it in your left
hand. Hold it and make sure the
small triangle mark at the
connection joint faces upward.
• Take the short panel (with the
honeycomb-shaped hole) in your
right hand.
Step 2:
• Slot the other long side panel
(with the Skotti logo) onto the foot
panel at the slim slits.
18
2
1
1
1
Slide the hooks into the slits on the left and right side panel, then the
tabs into the slits on the head panel. Push down the bottom panel as
firmly as possible.
Make sure each of the bottom panel tabs fits into its corresponding slot
2
on all three sides and all tabs are fixed in place.
Step 3:
• Slide the bottom panel into the
three-sided structure, pointed
side down.
• Make sure that the smooth edge
of the panel and the hooks and
tabs are at an equal height with
the slits.
Step 4:
• Take the burner pipe and hook it
into the horizontal 3 cm-long
slot (above the honeycomb-
shaped hole) at a steep angle and
with the nose facing upward.
• Carefully rest the burner pipe on
the bottom panel.
19
Advertisement
