Operating and Maintenance Instructions
1.0
Safety Notice
CAUTION – Safety
•
The Modbus Display & Control is only suitable for a safety extra low voltage supply of 10VDC up to 24VDC
CAUTION – Electro-Static Discharge
• Many modern electronic components are susceptible to damage from Electro-Static Discharge (Static
Electricity). During programming and commissioning, avoid unnecessary contact with electronic
components on PCB's. PCB's which are sensitive to static discharges and should be stored and
transported in anti-static packaging until they are required to be used.
Warning – Do not operate in an explosive atmosphere
Warning – The fans may start during connection and programming. If there is a residual risk of
contact with a fan then contact shall be prevented by suitable control methods to prevent accidental
contact
210-OMI14229-Iss2
© ebm-papst UK Ltd 2018
Operation & Maintenance Instructions
Chelmsford Business Park Chelmsford Essex CM2 5EZ
Telephone: +44(0)1245468555 Fax: +44(0)1245466336
e-mail
sales@uk.ebmpapst.com
Page 5 of 45