Table of Contents
Advertisement
Operating and Maintenance Instructions
PID I-Value – Sets the integral value of the controller's PID control algorithm
Address: 19
Availability: Constant Volume/Constant Pressure
Values: 0 to 1000 (default = 30)
NOTE: Value is stored in non-volatile memory in the MDC
PID D-Value – Sets the derivative value of the controller's PID control algorithm
Address: 20
Availability: Constant Volume/Constant Pressure
Values: 0 to 1000 (default = 0)
NOTE: Value is stored in non-volatile memory in the MDC
Controller Uptime High Bytes – Higher 16-bits of the Controller Uptime counter
Address: 21
Controller Uptime Low Bytes – Lower 16-bits of the Controller Uptime counter
Address: 22
NOTE: The Controller Uptime counter is in seconds. This counter will reset at every power cycle.
210-OMI14229-Iss2
© ebm-papst UK Ltd 2018
Operation & Maintenance Instructions
Chelmsford Business Park Chelmsford Essex CM2 5EZ
Telephone: +44(0)1245468555 Fax: +44(0)1245466336
e-mail
sales@uk.ebmpapst.com
Page 35 of 45
Advertisement
Table of Contents
