Mercedes-Benz 600 SEL 1993 Owner's Manual page 99

Vehicle Jack
See illustration for proper storage
of jack.
Before storing the jack on the felt
in the spare wheel well, the jack
arm (1) must be lowered almost to
the base (2) of the jack.
Warning!
The jack is designed ex­
clusively for jacking up the
vehicle at the jack tubes built
into either side of the vehicle.
Use the jack only to lift the ve­
hicle during a wheel change.
Never get beneath the vehicle
while it is supported by the
jack. Keep hands and feet
away from the area under the
lifted vehicle. Always firmly
set parking brake and block
wheels before raising vehicle
P89 0014 B13
with jack.
Do not disengage parking
brake while the vehicle is
raised. Be certain that the jack
is always vertical when in use,
especially on hills. Always try
to use the jack on level sur­
face. Be sure that the jack
arm is fully inserted in the
jack tube. Lower the vehicle
onto sufficient capacity
jackstands before working
under the vehicle.
Vehicle Tools, Storage
Compartment below Tool Box
1 Lock tool box lid
2 Unlock tool box lid
To open the storage compartment:
Lift out tool box.
To insert the tool box:
Position rear end of tool box,
press down its front end.
97