Combination Switch
1 Low beam (exterior lamp
switch position | D )
2 High beam (exterior lamp
switch position I D )
3 High beam flasher (high beam
available independent of
exterior lamp switch position)
4 Turn signals, right
5 Turn signals, left
56
To signal minor directional
changes, such as changing lanes
on a highway, move combination
switch to the point of resistance
only and hold it there.
To operate the turn signals
continuously, move the combi
nation switch past the point of
resistance (up or down). The
switch is automatically canceled
when the steering wheel is turned
to a large enough degree.
6 Press switch briefly:
One wipe without washer water
(select only if window is wet)
Press switch past resistance
point:
Windshield washer, windshield
wiper; headlamp cleaning
system (only in exterior lamp
switch positions -j<f: or g o
7 Windshield wiper
0 Wiper off
1 Intermittent wiping
II Normal wiper speed
III Fast wiper speed
When coming to a stop or
driving slower than approx.
3 mph (5 km /h), the wiper
speed automatically switches to
the next lower setting.
In setting " l" , the interval be
tween wipes is lengthened.
Upon accelerating again, the
wiper speed returns to the
previous setting.
Note:
The windshield washer reservoir,
hoses and nozzles are automati
cally heated.
.