Checking The Play Information - Sony DVP-S325 Operating Instructions Manual

Repeating a Specific Portion (A˜B Repeat)
3
When you reach the ending point (point B), press
ENTER again.
The setting points are displayed and the player starts
repeating this specific portion.
"A-B REPEAT" appears on the front panel display
during A˜B repeat play.
1 2 ( 2 7 )
1 8 ( 3 4 )
C 0 1 : 34 : 30
ON
A: 18 – 01 : 32 : 55
B: 18 – 01 : 34 : 30
To select, press , then
To cancel A˜B Repeat Play
Press CLEAR on the remote.
Notes
• You can set A˜B Repeat on only one specific portion.
• A˜B Repeat is canceled when:
– you open or close the disc tray
– you turn the power off
• When you set A˜B Repeat, the settings for Shuffle Play and
Program Play are canceled.
• You may not be able to set A˜B Repeat, depending on the
scene of the DVD or the VIDEO CD.
38
DVD
CHAPTER TIME
.
ENTER
Checking the Play
Information Z
You can check the play information on the bit rate, bit rate
history or the position where the disc is played (layer).
While playing a disc, the approximate bit rate of the
playback picture is always displayed by Mbps (Mega bit
per second) and the audio by Kbps (Kilo bit per second).
Select "ADVANCED" after pressing DISPLAY.
1 2 ( 2 7 )
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
ADVANCED
BIT RATE HISTORY
To select, press
pADVANCED
When playing a DVD
• BIT RATE: displays bit rate.
• BIT RATE HISTORY: displays bit rate and bit rate
history.
• LAYER: displays layer and the point picked up.
• OFF: turns off ADVANCED display.
z
You can display the ADVANCED display directly
Press DISPLAY until the ADVANCED display appears.
DVD
, then .
ENTER