Sony DVP-S325 Operating Instructions Manual page 12

Receiver (Amplifier) Hookups
If you have a digital component such as a
receiver (amplifier) with a digital connector, DAT
or MD
Connect the component via the DIGITAL OUT OPTICAL or
COAXIAL connector using an optical or coaxial digital
connecting cord (not supplied).
When you play a DVD, set "DIGITAL OUT" in "AUDIO SETUP"
to "ON" and then set "DOLBY DIGITAL" to "D-PCM," "MPEG"
to "PCM" and "DTS" to "OFF" in the setup display. (page 50)
p When using an optical digital connecting cord
Optical digital connecting cord
(not supplied)
Take off the cap and plug in the optical digital connecting cord.
CD/DVD player
DIGITAL OUT
OPTICAL COAXIAL
PCM/DTS/MPEG/
DOLBY DIGITAL (AC-3)
p When using a coaxial digital connecting cord
Coaxial digital connecting cord
(not supplied)
CD/DVD player
DIGITAL OUT
OPTICAL COAXIAL
PCM/DTS/MPEG/
DOLBY DIGITAL (AC-3)
Notes
• Refer to the instructions supplied with the component to be
connected.
• You cannot make digital audio recordings of discs recorded in
multi-channel surround format directly using an MD deck or
DAT deck.
When you make the connections above, do not set
"DOLBY DIGITAL" to "DOLBY DIGITAL," "MPEG" to
"MPEG" and "DTS" to "ON." If you do, a loud noise
will suddenly come out from the speakers, affecting
your ears or causing the speakers to be damaged.
12
Receiver (Amplifier)
with a digital
connector, MD deck,
DAT deck, etc.
DIGITAL IN
OPTICAL
Receiver (Amplifier)
with a digital
connector, MD deck,
DAT deck, etc.
DIGITAL IN
COAXIAL
z
If you have a digital component with a built-in DTS, Dolby
Digital or MPEG decoder
You can enjoy multi-channel surround sound by connecting the
component via the DIGITAL OUT OPTICAL or COAXIAL
connector using an optical or coaxial digital connecting cord (not
supplied). For details on hookups and settings, see page 13.
Setups for the player
Some setups are necessary for the player depending on
the components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 40.
• To listen to the sound through speakers connected
to a receiver (amplifier) having a digital connector or
to output the sound to a digital component such as
a DAT or MD deck
When you play a DVD, set "DIGITAL OUT" in
"AUDIO SETUP" to "ON" and then set "DOLBY
DIGITAL" to "D-PCM," "MPEG" to "PCM" and "DTS"
to "OFF" in the setup display (page 50). These are the
default settings.