Troubleshooting - Patlite NE-24A Series Complete Operation Manual

7

Troubleshooting

NE-24A
TYPE
Troubleshoot problems that occur by following the instructions in the table below.
No. Problem
1 The LED does not light.
Confi rmation
Has the wiring been connected properly?
Is the power source supplying the proper
voltage and current?
Has the fuse blown?
– 25 –
Remedy
Wire the LED again while referring to the
instructions in " 5 Wiring " (P. 12).
Use the appropriate voltage.
Replace the fuse if it has blown.