1. Manuals
  2. Brands
  3. Patlite Manuals
  4. Heating System
  5. NE-24A Series
  6. Complete operation manual

Patlite NE-24A Series Complete Operation Manual

Signal beacon
Hide thumbs
Table of Contents

Advertisement

Quick Links

Notice to Customer
Thank you very much for purchasing our PATLITE
products.
 Request the installation and wiring be performed by
a professional contractor if construction work is
involved.
 Prior to installation, read this manual thoroughly
before using this product to ensure correct use.
 If there are any questions concerning this product,
refer to the contact information at the end of this
document and contact your nearest PATLITE Sales
Representative.
To the Contractor
 Read this manual carefully prior to installation.
 Be sure to return this manual to the customer.
Signal Beacon
TYPE
TYPE
NE-24A
Complete Operation
NE-M1A
NE-IL
- 1 -
NE-24A/NE-M1A
Signal Beacon
NE-IL
Manual
Installation Operation Maintenance
10 Optional Parts
GA0001118_01
Page
2
3
6
9
12
16
25
28
31
32

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NE-24A Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Patlite NE-24A Series

  • Page 1: Table Of Contents

    NE-IL 5 Wiring 6 Using the LED and Buzzer Notice to Customer 7 Troubleshooting Thank you very much for purchasing our PATLITE products.  Request the installation and wiring be performed by  8 Specifi cations a professional contractor if construction work is involved.

  • Page 2: Read This First

    Read this First Safety Precautions The safety precautions that should always be followed in order to prevent injury to user or other individuals as well as prevent damage to property are described below.  The level of injury or damage caused by ignoring these safety precautions and using the product improperly is categorized ...

  • Page 3: Model Number Confi Guration

    Model Number Confi guration NE-24A TYPE LED Unit Model Rated Voltage Color Assembly Model 24 V DC Amber Green Blue White Model Number Example NE-24A-R  24 V DC   Red  – 3 –...
  • Page 4 NE-M1A TYPE LED Unit Model Rated Voltage Touch Sensor Buzzer Color Assembly Model 12 ~ 24 V DC With Touch Sensor With Buzzer Multicolor No Touch Sensor No Buzzer Model Number Example NE-M1ATB-M  12 ~ 24 V DC  ...
  • Page 5 NE-IL TYPE LED Unit Model Touch Sensor Buzzer Color Assembly Model With Buzzer Multicolor With Touch Sensor (General-Purpose Digital/Analog Input) With Touch Sensor No Touch Sensor Model Number Example NE-ILXB-M  IO-Link   Touch Sensor (General-Purpose Digital/Analog Input)  ...

  • Page 6: Names And Dimensions

    Names and Dimensions NE-24A TYPE Unit: mm Mounting Holes Ø 4.5 Globe O-Ring Case Wire Exit Hole Ø 13.3 Nameplate Bottom View Ø 56 (Without waterproof sheet) Waterproof Sheet Accessory Waterproof Sheet *1 The mounting holes (2 positions) are designed to be punched out.
  • Page 7 NE-M1A TYPE Unit: mm NE-M1ANN-M NE-M1ATB-M/NE-M1ANB-M Electrostatic Capacitive Touch Sensor Ø 56 Ø 56 (Only for NE-M1ATB-M) Globe Globe O-Ring O-Ring Case Buzzer Case Nameplate Nameplate Aperture Section Waterproof Sheet Waterproof Sheet Cable Gland Cable Gland Cable Cable UL2464 AWG24 × 7 Color: Red/Green/Blue/Yellow/Purple/Pink/Gray UL2464 AWG24 ×...
  • Page 8 NE-IL TYPE Unit: mm IO-Link C/Q Electrostatic Capacitive Ø 56 Touch Sensor Analog GND Analog IN (Only for NE-ILXB-M Digital GND and NE-ILTB-M) Globe Digital IN O-Ring N.C. Buzzer Case M12 Connector Pin Confi guration (NE-ILXB-M) Nameplate Aperture Section N.C. Waterproof Sheet N.C.

  • Page 9: Installation

    Installation Caution  This product is for indoor use only. (Do not use it outdoors.)   Do not leave the product, or use it without globe installed.   Do not apply excessive force when mounting/removing the globe. Failure to comply will result in damage. ...
  • Page 10 NE-M1A TYPE (1) (5) (1) Remove the globe by unscrewing it in a counter-clockwise direction. (2) Punch-out the mounting holes on the case and buzzer Positioning Mark case by drilling holes from the top. (3) Peel off the adhesive paper from the waterproof sheet and apply it to the case.
  • Page 11 NE-IL TYPE (1) Remove the M30 nut. (2) Fix on the mounting surface with the M30 nut. (3) Connect the M12 cable to the M12 Connector. Waterproof Sheet (1) (2) Installation Example  Installation Dimension [Unit: mm]  Installation Holes (Ø...

  • Page 12: Wiring

    Wiring Caution  Make sure the power is OFF before wiring. A short circuit may damage internal circuits.   Ensure the proper working voltage is used. Any mistake in wiring may result in damage.   Do not pull the wire out or push it into the case. ...
  • Page 13 Wiring Example NE-24A TYPE Wiring examples vary depending on the driving method. (A) External Contact Drive External Contact Power Supply (Non-polar) Fuse (B) I/O Unit Drive (NPN Transistor) Power Supply I/O Unit Fuse DC 24 V (C) I/O Unit Drive (PNP Transistor) Power Supply I/O Unit...
  • Page 14 NE-M1A TYPE NE-M1ANN-M/NE-M1ANB-M Do not connect directly to the power supply! This will cause damage! Input for Blink Control (Pink Wire) LED Red (Red Wire) LED Green (Green Wire) LED Blue (Blue Wire) Buzzer (Purple Wire) External Contact External Contact for Blink Control for Light Control Gray Wire...
  • Page 15 NE-IL TYPE NE-ILXB-M Analog IN (Pin-2) Analog Input External Sensor Analog GND (Pin-1) Digital IN (Pin-4) External Equipment Digital Input (PWS, etc.) Digital GND (Pin-3) L+ (Pin-5) IO-Link C/Q (Pin-8) IO-Link Master L- (Pin-7) NE-ILTB-M/NE-ILNB-M L+ (Pin-1) IO-Link C/Q (Pin-4) IO-Link Master L- (Pin-3) [ External Contact Capacity ]...

  • Page 16: Using The Led And Buzzer

    Using the LED and Buzzer NE-M1A TYPE The LED light color and buzzer sound pattern can be set by removing the globe and adjusting the DIP switches. For touch sensor specifi cations, the touch sensor input switching can be set. Caution ...
  • Page 17 Using the NE-M1A This product is able to use a signal wire to control the LED and buzzer. Each setting is adjusted using the setting DIP switches. NE-M1ATB can also be controlled with a touch sensor.  About DIP Switches ...
  • Page 18  Change Touch Sensor Input Settings  Change the operation of the touch sensor when it is touched as shown in the following table. Switch Position Switch 3 Switch 4 LED Color Blue White E.g. 1) If momentary operation and a red color LED have been set, touching the touch sensor will light up in red, regardless of the color that the LED is being controlled with the signal wire (or if it is off).
  • Page 19 NE-IL TYPE Using the NE-IL This product is an IO-Link compliant product. Follow the instructions for wiring up “ 5 Wiring ”(P. 15). The IO-Link master can control the LED and the buzzer. The functions that can be used differs depending on the product. Available functions are shown in the following table.
  • Page 20  Parameter Settings  For information about the parameter settings, please download the IODD from the LR6-IL page on our homepage (https:// www.patlite.com/). Please also download and use the parameter sheet in the same way.  Common Items  The common processed data shown in the following table can be received by the master can be received in each mode.
  • Page 21  Analog Input Mode  In this mode, LED and buzzer control uses analog input values without using processed data. Settings are specifi ed using the parameters. Refer to the following image for values used for analog input. Current value 21mA 20mA 3.2mA...
  • Page 22 Analog Control Examples) byte index 2010: Analog Input Value Threshold index 2011 Analog Input LED Color index 2012 Analog Input LED Pattern index 2013 Analog Input Buzzer Pattern For Index2010 enter a value that is larger than the value specifi ed by the lower byte. If 0 is specifi ed, the parameter for that byte will be ignored.
  • Page 23  Common Items for Each Mode  About LED Colors The “LED Color” used in each mode is shown in the following table. Color Setting Green Yellow Blue Purple Cyan White About LED Patterns The “LED Pattern” used in each mode is shown in the following table. Pattern Setting Name...
  • Page 24 About Buzzer Patterns The “Buzzer Pattern” used in each mode is shown in the following table. Pattern Name Setting Silent Continuous beep sound Rapid intermittent beep (call sign) Rapid hi-low Sweep sound Continuous beep sound 500ms ON / 500ms OFF Rapid intermittent beep (call sign) 500ms ON / 500ms OFF Rapid hi-low 500ms ON / 500ms OFF Sweep sound 500ms ON / 500ms OFF...

  • Page 25: Troubleshooting

    Troubleshooting NE-24A TYPE Troubleshoot problems that occur by following the instructions in the table below. Problem Confi rmation Remedy Wire the LED again while referring to the Has the wiring been connected properly? instructions in “ Wiring ” (P. 12). The LED does not light.
  • Page 26 NE-M1A TYPE Troubleshoot problems that occur by following the instructions in the table below. Problem Confi rmation Remedy Wire the LED again while referring to the Has the wiring been connected properly? instructions in “ Wiring ” (P. 12). Is the power source supplying the proper Use the appropriate voltage.
  • Page 27 NE-IL TYPE Troubleshoot problems that occur by following the instructions in the table below. Problem Confi rmation Remedy Refer to the instructions in “ Using the Is the processing data correct? LED and Buzzer ” (P. 16), and resend the processing data. Check “...

  • Page 28: Specifi Cations

    Specifi cations General Specifi cations (NE-24A) Product Name Signal Beacon Model NE-24A- Rated Voltage 24 V DC Voltage tolerance range Rated Voltage ±10 % Standard 22.4 mA Rated current consumption Maximum 26 mA Standard 0.53 W Rated power consumption Maximum 0.65 W Ambient operating temperature -30 °C to +50 °C...
  • Page 29 General Specifi cations (NE-M1A) Product Name Signal Beacon Model NE-M1ANN-M NE-M1ANB-M NE-M1ATB-M Rated Voltage 12 V DC to 24 V DC Voltage tolerance range 10 V DC to 30 V DC 12 V DC 55 mA 80 mA Standard 24 V DC 45 mA 65 mA Rated current...
  • Page 30 General Specifi cations (NE-IL) Product Name IO-Link Signal Beacon Model NE-ILNB-M NE-ILTB-M NE-ILXB-M Rated Voltage 24 V DC Voltage tolerance range 18 V DC to 30 V DC Standard 80 mA Rated current consumption Maximum 100 mA Standard 2.0 W Rated power consumption Maximum 2.4 W...

  • Page 31: Service Parts

    Service Parts These are the various parts for the customer to use when repairing or replacing parts for the product. O-Ring Number: 1 – 31 –...
  • Page 32 Optional Parts The optional parts for this product are listed below. (Top line: Part Name; Bottom: Model) Pole Bracket Model Number Confi guration NE-001D Model Body Color Model Number D : Off-darkgray External Diagram (Unit: mm) Applicable pole Applicable bracket POLE 800A21 POLE...
  • Page 33 Installation NE-IL NE-24A TYPE TYPE NE-M1A Black (for Ø 22 mm pole) Sealing rubber Gray (for Ø 25 mm pole) ・Remove the M30 nut ・Recommended installation on the main unit. screw: 4 × 12 mm Self tapping screw for plastics ・Recommended torque: 1 N m Caution ...
  • Page 34 Wall Mounting Bracket Model Number Confi guration NE-002D Model Body Color Model Number D : Off-darkgray External Diagram (Unit: mm) General Specifi cations Product Name Wall Mounting Bracket Model NE-002D Installation location Indoor Installation direction Upright direction Mass (Tolerance: ±10 %) 0.034 kg –...
  • Page 35 Installation NE-IL NE-24A TYPE TYPE NE-M1A ・Recommended installation screw: M4 × 20 mm Pan head screw M4 Hexagon nut ・Recommended torque: 0.6 N m Caution  Use in an area with no vibrations.  – 35 –...
  • Page 36 Parts for International Models NPT Pole Bracket Model v Confi guration SZP-092D Model Body Color Model Number D : Off-darkgray External Diagram (Unit: mm) General Specifi cations Product Name NPT Pole Bracket Model SZP-092D Installation location Indoor Installation direction Upright direction Mass (Tolerance: ±10 %) 0.023 kg –...
  • Page 37 Installation NE-IL NE-24A  Mounting the NPT pole  TYPE TYPE Press down on A when mounting to the pole. NE-M1A Forcibly mounting it may cause damage. (Tightening torque: 2.25 N·m) 1/2" NPT pole ・Remove the M30 nut ・Recommended installation on the main unit.
  • Page 38 The following optional parts can also be used with the NE-24A and NE-M1A. Round Multi-pitch Bracket Round Bracket Wall Mounting Bracket SZP-001W SZP-003W SZK-001U Aluminum Pole N Type Aluminum Pole T Type POLE22-[0100/0300/0500/0800/1000]AN POLE22-[0100/0300/0500/0800/1000]AT – 38 –...

This manual is also suitable for:

Ne-m1atb seriesNe-m1anb seriesNe-ilnb seriesNe-il seriesNe-m1a seriesNe-iltb series ... Show all

Table of Contents