Resuming Playback From The Point Where You Stopped The Disc (Multi-Disc Resume); Playing A Disc Frame By Frame - Sony DVP-NS705V Operating Instructions Manual

To return to normal play
Press H.

Playing a disc frame by frame

using the click shuttle
(Jog mode) (DVP-NS905V only)
1
Press JOG.
The indicator lights up and the player
enters pause mode.
2
Turn the click shuttle.
Depending on the turning speed,
playback goes to frame-by-frame
playback in the direction that the click
shuttle is turned. Turn the click shuttle
clockwise to go forward, and
counterclockwise to rewind (DVD only).
If you turn the click shuttle at a constant
speed for a while, the playback speed
goes to slow or normal.
To return to normal play
Press H.
To turn off the Jog mode
Press JOG again so that the indicator turns
off.
Resuming Playback From
the Point Where You
Stopped the Disc
Resume)
The player stores the point where you stopped
the disc for up to 40 discs and resumes
playback the next time you insert the same
disc. When you store a resume playback point
for the 41st disc, the resume playback point
for the first disc is deleted.
H
1
While playing a disc, press x to
stop playback.
"RESUME" appears on the front panel
display.
2
Press H.
The player starts playback from the point
where you stopped the disc in step 1.
z Hints
• To play from the beginning of the disc, press x
twice, then press H.
• For DVD-RWs in VR mode, CDs, Super Audio
CDs, and DATA CDs, the player remembers the
resume playback point for the current disc unless
the disc tray is opened, the mains lead is
disconnected, or only for DATA CDs, the player
enters standby mode.
(Multi-disc
x
37
,continued