Before You Start - Pulse Performance Products ATV QUAD Owner's Manual

Before You Start

WARNING:
Remove all packing and items from the display box. Make sure that the power switch is turned "OFF"
before assembling the quad.
NOTE: the ATV Quad is to be assembled by an adult.
Estimated Assembly Time
• Allow up to 15 minutes for assembly, not including initial charge time.
• Allow up to 14 hours for the initial charge
(see page 6 for charging information).
Battery charger
(included)
Required Tools
10mm/8mm 5mm hex
wrench wrench
(included) (included)
Phillips screwdriver
WARNING:
components may or may not be compatible with the design and will void the warranty.
4
6mm hex wrench
(not included)
DO NOT USE NON-PULSE PERFORMANCE PRODUCTS™ PRODUCTS WITH YOUR
Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
Brake lever
Throttle
Charging port
Air/tire pump with
pressure gauge for
schrader type valves
(not included)
Altering of the original
On/Off switch