Sony DVP-NS300 Operating Instructions (CD/DVD Component) Operating Instructions Manual page 24

Connecting an AV amplifier (receiver) with a digital input jack having a Dolby
D
Digital, MPEG audio, or DTS decoder, and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function
of your AV amplifier (receiver). You are not able to enjoy the TVS sound effects of the player.
xRecommended surround sound effects using this connection with your amplifier (receiver)
Dolby Digital (5.1ch) (page 67)
DTS (5.1ch) (page 67)
MPEG audio (5.1ch) (page 67)
z
To enhance the surround sound effects, refer to the operating instructions of the amplifier (receiver) for correct
speaker setting location.
Note
After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" (page 26). If
your AV amplifier (receiver) has a DTS decoder, set "DTS" to "ON" (page 26). If your AV amplifier (receiver) has
an MPEG audio decoder, set "MPEG" to "MPEG" (page 62). Otherwise, no sound or a loud noise will come from
the speakers.
24