Sony DVP-NS300 Operating Instructions (CD/DVD Component) Operating Instructions Manual page 18

A
If you are connecting to a SCART (EURO AV) input jack
Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to
avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV
conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to
be connected.
Also, when you set "LINE" to "S VIDEO" or "RGB" under "CUSTOM SETUP" in the Setup
Display (page 59), use a SCART (EURO AV) cord that conforms to each signal.
B
If you are connecting to a video input jack
Connect the yellow plugs of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 19).
C
If you are connecting to an S VIDEO input jack
Connect the S VIDEO cord (not supplied). You will enjoy high quality images.
Notes
Do not connect your player to a VCR. You may not receive a clear image on the TV screen if you pass the player
signals via the VCR.
When you connect the player to your TV via the SCART (EURO AV) jacks, the TV's input source is set to the
player automatically when you start playback or press any button except for POWER on the player or [/1 on the
remote. If you wish to watch TV, press TV/DVD on the remote to return the input to the TV.
When you play a disc recorded in the NTSC colour system, the player outputs the video signal or the setup
display, etc., in the NTSC colour system and the picture may not appear on PAL colour system televisions.
In this case, open the tray and remove the disc.
18
Yellow (Video)
White (L)
Red (R)
CD/DVD player
VCR
Connect directly
Yellow (Video)
White (L)
Red (R)
TV