Table of Contents
Advertisement
4. How to use the Bluetooth feature on your Qolsys Panel
4.1 Set up Bluetooth disarming
1.
Enable the Bluetooth discovery option in the Android or iPhone Bluetooth settings on your smartphone to allow
the IQ Panel 2 to see the phone on the network.
2.
On the Qolsys panel, press or swipe down the clock display at the top to open the settings tray then press Settings.
3.
Press Advanced Settings then enter the master code; this is the default code you selected when the IQ Panel 2 was installed.
4.
Press Bluetooth Devices then press Settings.
5.
Check Bluetooth and Bluetooth Disarm (if not already checked) then press the back arrow to exit.
6.
Press Add Phone.
7.
Select your smartphone from the list of visible devices to send a pairing request to the smartphone.
8.
The request should appear on the phone. Press OK to accept then Pair on the IQ Panel 2. Press OK to confirm.
9.
Your smartphone will appear under Paired Devices. Press Home to exit.
4.2 Remove a Bluetooth paired device
1.
On the Qolsys panel, press or swipe down the clock display at the top to open the settings tray then press Settings.
2.
Press Advanced Settings then enter the master code; this is the default code you selected when the IQ Panel 2 was installed.
3.
Press Bluetooth Devices then press Delete Device.
4.
Check your smartphone from the list of devices and press Delete. Press OK to confirm.
4.3 Disable all Bluetooth disarming
On the Qolsys panel, press or swipe down the clock display at the top to open the settings tray then press Settings.
1.
Press Advanced Settings then enter the master code; this is the default code you selected when the IQ Panel 2 was installed.
2.
Press Bluetooth Devices then press Settings.
3.
Uncheck Bluetooth to turn off all Bluetooth communications.
4.
Or
Uncheck Bluetooth Disarm to turn off Bluetooth disarming.
5.
When you've made your selection, press the back arrow to exit.
5. How to use the live view on your Qolsys panel
1.
Swipe left on the Qolsys IQ Panel 2's home screen until you reach the Live Video Cameras page.
2.
If the live view is enabled, you'll see your cameras listed on the right side of the screen.
3.
Select the camera to view.
4.
Press the play icon to view the live video stream from the selected camera.
7 ‒ How to use my Qolsys Security and Automation panel
Advertisement
Table of Contents
