How Do I Use Photo Frame On The Qolsys Panel; Changing Photo Frame Settings - Bell QS-9004-VRZ How To Use Manual

1. How do I use Photo Frame on the Qolsys panel

The IQ Panel 2 can be set to display digital photos when not in use.

1.1 Changing Photo Frame settings

Tap the top portion of your Qolsys screen to access the Settings menu. Then select:
1. Photo Frame
2. Photo Frame settings
In the Photo Frame settings section you can change the following:
Duration
Effect
Shuffle
Display type
Photo Frame start time
Nighttime mode start time
Nighttime mode end time
Nighttime mode settings
3 ‒ How to use my Qolsys Security and Automation panel
Sets how long each image will show before transitioning to the next image in the library
(1, 2 or 5 minutes).
Lets you choose a transition effect between each image (fade to black, dissolve).
When enabled, displays pictures in either random or sequential order.
Lets you choose what to display on the screen when the panel is not in use.
Lets you choose the amount of time to wait after the last press before starting
the selected display type (5, 10, 15, 20, 25, or 30 minutes).
Determines the time when the display, voices or chimes shut down completely
(to turn off the LCD, voices and/or chimes at night).
Determines the time when the display, voices or chimes "wake up" after sleeping
(to turn the LCD, voices and/or chimes back on in the morning).
Lets you choose what the nighttime mode can control (display, voices and/or chimes).