Table of Contents
Advertisement
1.2 Load new images from an SD card
To load new images, tap the top portion of your Qolsys screen to access the Settings menu. Then select:
1.
Photo Frame
2.
Add Photos
Steps to load new photos
1.
Load an SD card with photos that you'd like to display on the panel.
Photo requirements:
•
JPEG
•
1280 x 720 pixels (or less)
•
No larger than 5 MB each
•
No more than 20 images
•
Saved in a folder entitled "Photos"
2.
Insert the SD card into the panel.
The card will slide all the way in. To remove, push gently and card will spring out.
3.
Open the Photo Frame app.
4.
Press Add Photos.
5.
Choose Replace All Photos or Add New Photos.
6.
Wait for the images to load.
7.
Once loaded, you can press Play to test.
Note: Before removing the SD card, go to Settings, press SD Card and select Unmount.
4 ‒ How to use my Qolsys Security and Automation panel
Advertisement
Table of Contents
