Controlling Your Tv With The Supplied Remote - Sony DVP-NC665P Operating Instructions (DVD player for HT system) Operating Instructions Manual

Controlling Your TV with
the Supplied Remote
You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
Number
Number
buttons
buttons
You can control the following items with the
supplied remote.
By pressing
TV [/1
VOL +/–
TV/VIDEO
Note
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.
62
You can
Turn the TV on or off
Adjust the volume of the TV
Switch the TV's input source
between the TV and other
input sources
Controlling other TVs with the
remote
You can control the sound level, input source,
and power switch of non-Sony TVs as well. If
your TV is listed in the table below, set the
appropriate manufacturing code.
1
While holding down TV [/1, press the
number buttons to select your TV's
manufacturer's code (see the table
below).
2
Release TV [/1.
Code numbers of controllable TVs
Manufacturer Code number
Sony (default) 01
Aiwa (default) 01
JVC 09
Panasonic 19
Philips 21
RCA 10
Samsung 20
Sanyo 11
Sharp 18
Toshiba 07
Zenith 15
Notes
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.