Additional Operations - Sony DVP-NC665P Operating Instructions (DVD player for HT system) Operating Instructions Manual

• Set the sound to "STEREO" using the
AUDIO button when you play DTS sound
tracks on a CD (page 49).
• Do not play DTS sound tracks without first
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack even if "DTS" in "AUDIO SETUP" is
set to "OFF" in the Setup Display (page 68),
and may affect your ears or cause your
speakers to be damaged.
Notes on playing DTS sound tracks on a
DVD
• DTS audio signals are output only through
the DIGITAL OUT (COAXIAL or
OPTICAL) jack.
• When you play a DVD VIDEO with DTS
sound tracks, set "DTS" to "ON" in
"AUDIO SETUP" (page 68).
• If you connect the player to audio
equipment without a DTS decoder, do not
set "DTS" to "ON" in "AUDIO SETUP"
(page 68). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.

Additional operations

28
To
Select a disc
Stop
Pause
Resume play after
pause
Go to the next disc
Go to the next chapter,
track, or scene in
continuous play mode
Go back to the
previous chapter,
track, or scene in
continuous play mode
Stop play and remove
the disc
Replay the previous
scene*
Briefly fast forward
the current scene**
Check if a disc is in
the disc compartment
* For DVD VIDEOs and DVD-RWs/DVD-Rs
only.
**For DVD VIDEOs and DVD-RWs/DVD-Rs or
DVD+RWs only.
z Hints
• The Instant Replay function is useful when you
want to review a scene or dialog that you missed.
• The Instant Search function is useful when you
want to pass over a scene that you don't want to
watch.
• Before loading the discs, a disc number indicator
of an empty compartment may be lit.
Note
You may not be able to use the Replay function with
some scenes.
Operation
Press DISC SELECT
1–5 on the player
Press x
Press X
Press X or H
Press DISC SKIP
Press >
Press .
Press Z
Press
INSTANT REPLAY
during playback
Press
INSTANT SEARCH
during playback
Press LOAD on the
player.
The disc number
indicators on the front
panel display (1–5)
light up.