Sony DVP-NC665P Operating Instructions (DVD player for HT system) Operating Instructions Manual page 52

TVS STANDARD
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are
reproduced as shown in the illustration
below. Use this setting when you want to use
TVS with 2 separate speakers.
L
L : Front speaker (left)
R : Front speaker (right)
: Virtual speaker
z Hints
• You can also select "TVS" by pressing the
SURROUND button on the player.
• You can also select "TVS" from the Control
Menu (page 12).
Notes
• When the playing signal does not contain a signal
for the rear speakers, the surround effects cannot
be heard.
• When you select one of the TVS modes, turn off
the surround setting of the connected TV or
amplifier (receiver).
• Make sure that your listening position is between
and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings.
• Not all discs will respond to the "TVS NIGHT"
function in the same way.
52
R