Step 3: Tv Hookups - Sony DVP-NC655P Marketing Operating Instructions Manual

Step 3: TV Hookups

Connect the supplied audio/video cord and the power cord in the order (1~3) shown below.
Be sure to connect the power cord last.
to LINE OUT
L/R (AUDIO)
1 or 2
1
Audio/video
cord (supplied)
l : Signal flow
When connecting to a wide screen TV
Depending on the disc, the image of some
discs may not fit your TV screen.
If you want to change the aspect ratio, please
refer to page 69.
When connecting to a TV that accepts
progressive (480p) format signal
You need to use the COMPONENT VIDEO
OUT jacks to view progressive signals. Hook
up your TV using pattern C on page 18, and
then run Quick Setup on page 25.
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT (VIDEO) jack on the player to the TV's
video input jack, and connect the LINE OUT L/R
(AUDIO) 1/2 jacks to the TV's audio input jack.
16
CD/DVD Player
to LINE OUT
(VIDEO) 1 or 2
to video input
to audio input
3
Power source
TV
2
Power source