Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
• Surround effects: TVS DYNAMIC (page 53),
TVS WIDE (page 53)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 53)
or
MD deck/DAT deck
• Surround effects: none
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 73)
AV amplifier (receiver) with a digital input jack
having a Dolby Digital or DTS** decoder and 6
speakers
• Surround effects: Dolby Digital (5.1ch) (page 73),
DTS (5.1ch) (page 73)
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
**"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
20
through
.
A
D
Connection
(page 21) Example
A
(page 22) Example
B
(page 23) Example
C
(page 24) Example
D
Your setup