Table Of Contents - Stiga VILLA 2000 Workshop Manual

Edition Manual
2008-05-19 Workshop Manual, Stiga Villa/Ready 1 General
Contents in this chapter
1.1 Introduction ...............................2
1.1.1 Responsibility declaration ......2
1.1.2 How this manual is used .......2
1.1.3 Abbreviations .........................2
1.2 Safety Precautions ...................2
1.2.1 Symbols and general
warnings .................................3
1.2.2 Warm parts ............................3
1.2.3 Moving parts ..........................3
1.2.4 Lifting and blocking up ...........3
1.2.5 Cleanliness ............................3
1.2.6 Tightening torque ..................3
1.2.7 Sharp edges ..........................3
1.2.8 Replacement parts ................3
1.2.9 Inspection ..............................3
1.3 Guarantee ..................................4
1.3.1 Component guarantee,
chassis .................................. 4
General
This Manual do not cover repair instructions for the motors. Regarding motors, contact the
respective representative in the actual country.
This Manual and its specifications are valid for machines in their original design. In case of
modified or changed machine, i.e. the motor is replaced, the manual accordance is limited.
The manual is divided in the following chapters:
Chapter 1 is this chapter
Chapter 2 Chassis
Chapter 3 Steering
Chapter 4 Hydraulic system
Chapter 5 Belts
Chapter 6 Control Wires
Chapter 7 Electrical system
1 General instructions
Chapter
1.3.2 Exeptions .............................. 4
1.3.3 Conditions for validity of
the warranties ........................ 4
1.4 Unpacking and assembly ........ 5
1.4.1 Unpacking ............................. 5
1.4.2 Battery .................................. 6
1.4.3 Assembly .............................. 7
1.4.4 Final checks .......................... 9
1.5 Service ...................................... 10
1.5.1 First Service ........................11
1.5.2 Intermiadate Service ........... 11
1.5.3 Basic Service ...................... 12
1.5.4 Description of service points. 13
1.6 Technical specifications ........... 16
1.6.1 General tightening torque ...... 16
Page
1