Step 4: Connecting The Audio Cords - Sony DVP-NC625 Primary Operating Instructions Manual

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
• Surround effects: TVS DYNAMIC (page 50),
TVS WIDE (page 50)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 50)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 50).
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 70)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, MPEG audio, or DTS**
decoder and 6 speakers
• Surround effects:
– Dolby Digital (5.1ch) (page 70)
– DTS (5.1ch) (page 70)
– MPEG audio (5.1 ch) (page 70)
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
** "DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
18
through .
A D
Connection
(page 19)
A
(page 20)
B
(page 21)
C
(page 22)
D
Your setup (example)