Specifications - Sony DVP-NC625 Primary Operating Instructions Manual

Specifications

System
Laser: Semiconductor laser
Signal format system: NTSC/PAL
Audio characteristics
Frequency response: DVD VIDEO (PCM
96 kHz): 2 Hz to 44 kHz (±1.0 dB)/DVD
VIDEO (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)/CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB
(LINE OUT L/R (AUDIO) jacks only)
Harmonic distortion: 0.003 %
Dynamic range: DVD VIDEO: 103 dB/CD:
99 dB
Wow and flutter: Less than detected value
(±0.001% W PEAK)
The signals from LINE OUT L/R (AUDIO)
jacks are measured. When you play PCM
sound tracks with a 96 kHz sampling
frequency, the output signals from the
DIGITAL OUT (COAXIAL or OPTICAL)
jack are converted to 48 kHz sampling
frequency.
Outputs
(Jack name: Jack type/Output level/Load
impedance)
LINE OUT (AUDIO): Phono jack/2 Vrms/
Over 10 kilohms
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
DIGITAL OUT (OPTICAL): Optical
output jack/-18 dBm (wave length 660
nm)
COMPONENT VIDEO OUT (Y, C
Phono jack/Y: 1.0 Vp-p, C
0.7 Vp-p/75 ohms
LINE OUT (VIDEO): Phono jack/1.0 Vp-p/
75 ohms
S VIDEO OUT: 4-pin mini DIN/
Y: 1.0 Vp-p/C: 0.286 Vp-p/75 ohms
72
General
Power requirements:
Power consumption: 14 W
Dimensions (approx.):
Mass (approx.):
5.1 kg
Operating temperature: 5 C to 35 C
Operating humidity: 25 % to 80 %
Supplied accessories
See page 15.
Specifications and design are subject to
change without notice.
E
As an
Corporation has determined that this product
meets the
energy efficiency.
, C ):
B R
, C :
B R
110 – 240 V AC, 50/60 Hz
430 95.5 409 m (width/height/depth)
incl. projecting parts
S
R
NERGY TAR is a U.S. registered mark.
E S
NERGY TAR
E S
NERGY
R
Partner, Sony
R
TAR guidelines for