Sony DVP-F5 Operating Instructions Manual page 22

5.1 Channel Surround Hookups (continued)
Setups for the player
Some setup adjustments are necessary for the player depending on the
components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 74.
• When you connect an audio component with a built-in Dolby Digital
decoder A
Select "DOLBY DIGITAL" under "DIGITAL OUT" in the "AUDIO
SETUP" display and set "DOLBY DIGITAL" to "DOLBY DIGITAL."
(page 91)
• When you connect an audio component with a built-in MPEG decoder B
Select "MPEG" under "DIGITAL OUT" in the "AUDIO SETUP" display
and set "MPEG" to "MPEG." (page 92)
• When you connect an audio component with a built-in DTS decoder C
Select "DTS" under "DIGITAL OUT" in the "AUDIO SETUP" display and
set "DTS" to "ON." (page 92)
To set, press
To quit, press
Notes
• When you do not connect an audio component with a built-in Dolby Digital
decoder, do not set "DOLBY DIGITAL" to "DOLBY DIGITAL."
• When you do not connect an audio component with a built-in MPEG decoder,
do not set "MPEG" to "MPEG."
• When you do not connect an audio component with a built-in DTS decoder, do
not set "DTS" to "ON."
22
Getting Started
AUDIO SETUP
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT
DOLBY DIGITAL: DOLBY DIGITAL
MPEG:
DTS:
, then
ENTER
.
DISPLAY
A
MPEG
B
ON
C
.