Receiver (Amplifier) Hookups - Sony DVP-F5 Operating Instructions Manual

Receiver (Amplifier) Hookups

This connection is for listening to the sound through speakers
connected to a receiver without a built-in DTS, Dolby* Digital or MPEG
decoder. Refer as well to the instructions supplied with the component
to be connected.
z You can enjoy surround sounds even if you connect front speakers only
You can use 3D sound imaging to create virtual rear speakers from the sound of the
front speakers (L, R) without using actual rear speakers (VES:Virtual Enhanced
Surround). For details, see page 58.
* Manufactured under license from Dolby Laboratories.
"Dolby," "Pro Logic" and the double-D symbol are trademarks of Dolby
Laboratories.
Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights
reserved.
Required cords
Audio/Video connecting cord (supplied) (1)
Yellow
Black
S video cord (not supplied) (1)
When connecting the cords, be sure to match the color-coded cord to the
appropriate jacks on the components: Red (right) to Red and White (left) to
White. Connect the Black jack of the audio/video connecting cord to AUDIO
OUT (White) on the player. Be sure to make connections firmly to avoid hum
and noise.
If you have a digital component such as a receiver (amplifier) with a digital
connector, DAT or MD, connect the component via the OPTICAL OUT
connector using an optical digital connecting cord (not supplied).
Optical digital connecting cord (not supplied) (1)
Optical
mini-plug
Yellow
White (L)
Red (R)
Optical plug
continued
Getting Started
17