Table of Contents
Advertisement
Initial Settings (continued)
SCREEN SET UP
DISPLAY
TV Aspect
16 : 9 Wide
Display Mode
Widescreen
ENTER
DVD
TV Aspect
4:3: Select when a standard 4:3 TV is connected.
16:9 Wide: Select when a 16:9 wide TV is
connected.
DVD
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to "4:3".
LetterBox: Displays a wide picture with bands on
the upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on
the entire screen and cuts off the portions that do not
fit.
AUDIO SET UP
Each DVD disc has a variety of audio output options.
Set the player's AUDIO SET UP options according to
the type of audio system you use.
AUDIO
Dolby Digital
DTS
MPEG
Sample Freq.
DRC
Vocal
ENTER
Dolby Digital / DTS / MPEG
Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an amplifier
or other equipment with a Dolby Digital, DTS or
MPEG decoder.
PCM (for Dolby Digital / MPEG): Select when
connected to a two-channel digital stereo
amplifier. DVDs encoded in Dolby Digital or
MPEG will be automatically downmixed to
two-channel PCM audio.
Off (for DTS): If you select "Off", the DTS signal
is not output through the DIGITAL OUT jack.
43
PCM
Off
PCM
48 kHz
On
On
DVD
Advertisement
Table of Contents
