Controlling the volume of your
AV amplifier (receiver) with the
remote
Number
buttons
1
Slide the TV/DISC EXPLORER/DVD
switch to DVD.
2
Hold down [/1, and enter your AV
amplifier (receiver)'s manufacturer's
code (see the table below) using the
number buttons.
3
Release [/1.
The VOL +/
– buttons control the AV
amplifier's volume.
If you want to control the TV volume
Slide the TV/DISC EXPLORER/DVD
switch to TV.
Code numbers of controllable AV
amplifiers(receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
Manufacturer
Code number
Sony
80, 88, 89, 91
Denon
84, 85, 86
Kenwood
92, 93
Onkyo
81, 82, 83
Pioneer
99
Sansui
87
Technics
97, 98
Yamaha
94, 95, 96
z Hint
If you want to control the TV's volume even when
the TV/DISC EXPLORER/DVD switch is set to
DVD, repeat Steps 1 and 2 and enter the code
number 90 (default).
87