Tv Virtual Surround Settings (Tvs) - Sony DVP-CX875P Operating Instructions Manual

1 2 3
1 2 ( 2 7 )
1 8 ( 3 4 )
T 1 : 3 2 : 5 5
1: ENGLISH
Currently playing program format**
* "PCM," "DTS," or "DOLBY DIGITAL" is
displayed.
In the case of "DOLBY DIGITAL," the
channels in the playing track are displayed
by numbers as follows:
For Dolby Digital 5.1 ch:
DOLBY DIGITAL 3 / 2 . 1
Front component 2 +
Center component 1
**The letters in the program format display
mean the following sound component:
L: Front (left)
R: Front (right)
C: Center
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural): The rear
component of the Dolby
Surround processed signal and
the Dolby Digital signal
LFE: Low Frequency Effect signal
z Hint
For Dolby Digital and DTS, "LFE" is always
enclosed in a solid line regardless of the LFE signal
component being output.
Note
If "DTS" is set to "OFF" in "AUDIO SETUP"
(page 95), the DTS track selection option will not
appear on the screen even if the disc contains DTS
tracks.
72
Current audio format*
PLAY
ALL
DVD
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L C R
LFE
LS RS
Rear component 2
LFE (Low
Frequency
Effect)
component 1
TV Virtual Surround
Settings
(TVS)
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
1
Press SURROUND during
playback.
The following display appears.
TVS DYNAMIC
2
Press SURROUND repeatedly to
select one of the TVS sounds.
Refer to the following explanations given
for each item.
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD