Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord in the order (1~3) shown below.
Be sure to connect the power cord last.
1 or 2
l : Signal flow
To change the aspect ratio for the
Depending on the disc and the TV type
(standard 4:3 screen TV or wide screen TV),
the image may not fit the TV screen.
If this happens, change the aspect ratio (page
When connecting to a TV that accepts
progressive (480p) format signal
You need to use the COMPONENT VIDEO
OUTPUT jacks to view progressive signals.
Hook up your TV using pattern C on page
21, and then run Quick Setup on page 29.
to AUDIO OUTPUT
L/R 1 or 2
to video input
to audio input
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
VIDEO OUTPUT jack on the player to the TV's
video input jack, and connect the AUDIO OUTPUT
L/R 1/2 jacks to the TV's audio input jack.