Playing Discs
Inserting Discs
You can insert up to 400 discs into this player.
[/1
Front cover
.–/>+/ENTER dial
1
[/1
Press
.
The player turns on.
2
Press OPEN/CLOSE.
The front cover opens.
3
Press DISC CHANGE.
The DISC CHANGE indicator lights up.
4
While checking the disc slot number
indicated on the front panel display or
by the slot, turn the .–/>+/
ENTER dial until you find the disc slot
where you want to insert a disc.
Disc slot number
Disc slot
at the loading position
5
Insert a disc.
Gently place the disc all the way into the
slot and do not release the disc until it is
completely seated. Make sure you have
OPEN/CLOSE
+100
DISC CHANGE
inserted the disc into each slot at a right
angle to the rotary table. If the disc is not
put in straight, it may damage the player
or the disc.
With the playback side
facing left
6
Repeat steps 4 and 5 to insert more
discs.
7
Press OPEN/CLOSE.
The front cover closes. The rotary table
turns and the disc slot selected in step 4 is
set to the playing position.
z Hint
In step 4, you can select a disc slot number by
skipping 10 slots. After sliding the TV/DISC
EXPLORER/DVD switch to DISC EXPLORER or
DVD, press DISC SKIP +/– on the remote. 10 disc
slots before or after the current disc slot number will
be skipped. To skip 100 slots, press +100 on the
player.
Notes
• Do not turn the turntable by hand.
• Do not reach inside of the turntable compartment.
Always follow the correct steps for inserting and
removing discs.
• When transporting the player, remove all discs
from the player. Failure to remove the discs may
cause damage to the player.
• When closing the front cover, be careful not to let
anything get caught between the door and the
player.
33
c continued
Need help?
Do you have a question about the DVP-CX777ES Operating Instructions (DVD Player DVPCX777ES) and is the answer not in the manual?
Questions and answers