Step 4: Connecting The Audio Cords; Select A Connection - Sony DVP-CX777ES Operating Instructions (DVD Player DVPCX777ES) Operating Instructions Manual

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.

Select a connection

Select one of the following connections,
Components to be connected
TV
• Surround effects: TVS DYNAMIC (page 71),
TVS WIDE (page 71)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 71)
or
MD deck/DAT deck
• Surround effects: None
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 93)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 101)
– DTS (5.1 ch) (page 101)
– Super Audio CD Multi channel (page 101)
or
AV amplifier (receiver) with digital input jacks
having a Dolby or DTS** decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 101)
– DTS (5.1 ch) (page 101)
22
through .
A D
Connection
(page 24)
A
(page 25)
B
(page 26)
C
(page 27)
D
Your setup (example)