Sony DVP-8306 Operating Instructions Manual page 8

Getting Started
z
If you have a digital component such as an amplifier
with a digital connector, DAT or MD
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial digital
connecting cord (not supplied).
When you play a DVD, set "DIGITAL OUT" in "INITIAL
SETUP 2" to "PCM" in the setup display. (page 35)
p When using an optical digital connecting cord
Optical digital connecting cord
Take off the cap and plug in the optical digital connecting
cord.
CD/DVD player
OPTICAL
PCM/
DOLBY DIGITAL (AC-3)
DIGITAL OUT
p When using a coaxial digital connecting cord
Coaxial digital connecting cord
CD/DVD player
OPTICAL
PCM/
DOLBY DIGITAL (AC-3)
DIGITAL OUT
Notes
• Refer to the instructions supplied with the component
to be connected.
• You cannot make digital audio recordings of discs
recorded in Dolby Digital (AC-3) format directly using
an MD deck or DAT deck.
When you make the connections above, do not set
"DIGITAL OUT" in "INITIAL SETUP 2" to "DOLBY
DIGITAL/PCM." If you do, a loud noise will
suddenly come out from the speakers, affecting
your ears or causing the speakers to be damaged.
EN
8
(not supplied)
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
DIGITAL IN
COAXIAL
OPTICAL
(not supplied)
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
COAXIAL DIGITAL IN
COAXIAL
z
If your TV has an S-link connector
You can control the CD/DVD player from the TV.
Connect the TV via the S-LINK connector using the S-link
cable (supplied). Refer to the instructions supplied with
the TV to be connected.
Audio/Video/S-link cord
(supplied)
S-link
CD/DVD player
S
LINK
S-link
TV
S-LINK